The “Slash” Guitar in Progress

The “Slash” Model guitar features an Ancient (3000 years old) Sitka Spruce top, “The Tree ” back and sides, Ebony binding lined with sterling Silver, beveled arm rest, Gotoh 510 tuners with petrified whale vertebrae buttons, sterling silver in-lay, an asymmetrical figured Honduran Mahogany neck for easy hand positioning, 1¾″ nut width, 2¼″ string spacing, and a pinless bridge.

"The Tree" sides, bent

“The Tree” sides, bent

"The Tree" back and sides, braced and assembled

“The Tree” back and sides, braced and assembled

Inspiration for the rosette

Inspiration for the rosette

The inspiration for the rosette came to me, much like all my best thinking, while on an ocean-side walk. It was a beautiful sunny morning when I came across this rusty electrical part sitting on the rocky shore after the tide had receded. It was sitting upright, so when looking down at it I saw a vision of a volume dial. Back in the shop is when I could actually start pulling pieces of wire from the object. I scraped the coating that was on the wire due to sitting in the ocean. What I found was the wiring was actually aluminum, which could be used directly in the rosette. Now to actually create the rosette…
After doing a simple mock up rosette for Slash’s approval, I felt I could carry the theme of “electric” within the rosette design. This was done by running the aluminum wiring in a circular manner with simple “Rises and Falls” of the wire to create the feeling of energy, in a heartbeat monitor fashion, and encasing the wires with ebony, trimmed on the inside and outside of the rosette with “Fine (Pure) Silver.” To visually connect the rosette with the body of the guitar, I will be installing pure silver perfling inside the binding. It’s a very simple rosette. I am recycling the aluminum wire, yet due to the cost of the pure silver it is my most expensive rosette design to date.

Close -up view of the finished rosette, lined with Silver

The finished rosette is lined with Silver

Hand made petrified whale vertebrae buttons on Gotoh 510 tuners

Petrified whale vertebra buttons on Gotoh510 tuners

Bracing for the inside of the Ancient Glacier Sitka Spruce top

Inside bracing of the Ancient Glacier Spruce top

Tags:

Comments are closed.